General Trade Enterprise

  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
  • Slider image of generaltradebd.com
Download   G-Trade Manager

Moisture Meter for Concrete/Plaster/Mortar

Moisture Meter for Concrete/Plaster/Mortar
Price
৳: 14500
৳: 14500

Category

Test and Measurement Instruments Digital Moisture Meters

Availability :

Available

Delivery options

Online Only

Moisture Analyser for Concrete / Wood / Plaster / Mortar etc By PCE Instruments Material Moisture Tester PCE-PMI 1 Non- destructive material moisture measurement / measuring method is the electrical resistance in the material / moisture measurements of concrete, wood, plaster,mortar etc. / max-, min- and hold-function The Material Moisture Tester PCE-PMI 1 is ideally suited for local control at wood yards, building lots or in the house. The material Moisture Meter enables fast and reliable determination of the moisture content of wood and building materials. The battery-powered device is preferably used when the surface of the material must not be damaged during measurements of the moisture content. This measurement method also allows repeated measurements at the same place. Preferred applications for the PCE-PMI 1 are building lots, timber and tools trade as well as sanitary facilities. The material Moisture Meter has an important role in the non-destructive control of wall drying. In new buildings, the masonry has to be dry before plastering. Otherwise the walls cannot release sufficient moisture. In older buildings with poorly insulated walls, the Moisture Meter helps you find damp places. Here are the most important topics mold, heating and ventilation. In the wood processing industry and forestry, the Material Moisture Meter PCE- PMI 1 is used to determine the moisture of wood. The drying status is critical to the further use and therefore the value of the wood. The housing of impact-resistant plastic protects the hand-held device when used in harsh environments: building lots, in the wood or in mashine shops. The operation of the Material Moisture Meter PCE-PMI 1 is very simple. A light touch of the material with the measuring ball is enough to measure degrees of moisture up to 40 mm deep into the object without damaging it. After pressing the yellow button, the measured values appear in the display in comfortable large numbers. These are, due to the backlighting, even in low light conditions, easy to read. The min-max function saves peak values for different measurements. The ergonomically designed Material Moisture Meter PCM-PMI 1 with its four different colored buttons is user-friendly and intuitive usable. The Material Moisture Meter PCE-PMI 1 measures the electrical resistance of the material for determining its moisture content. The measured value is shown in the measuring range from 0 up to 100 digits on the display - Impact-resistant plastic - Sensor type metal spheroid - Penetration depth of 20-40 mm - Selectable LCD backlight - Auto-off-function - The measuring principle is the electrical resistance of the material - Moisture measurements of concrete, wood, plaster, mortar, etc. - Min-Max-function - Hold-function - material moisture measurements without damaging the surface Technical Specification Measuring range: 0 ... 100 digits Resolution:1 digit Penetration depth: 20 ... 40 mm Measuring principle:Capacitive (electrical resistance) Sensor type: Metal spheroid Display:LCD Display Battery:1 x 9-V Battery Dimensions:180 x 45 x 35 mm Weight:180 g

General Trade Enterprise

Contact Us

Find Us
  • : 24, Bangabondhu National Stadium, Dhaka-1000
  • : 01926501052
  • : gentrde@gmail.com

Write your message

Name :
Email :
Mobile :
Message :

Developed by : Shafiul Bashar